<?xml version="1.0" encoding="UTF-8"?><rss version="2.0"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:wfw="http://wellformedweb.org/CommentAPI/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
	xmlns:slash="http://purl.org/rss/1.0/modules/slash/"
	>

<channel>
	<title>2003 Accord &#8211; DIYAutoWorksNG</title>
	<atom:link href="https://www.diyautoworksng.com/tag/2003-accord/feed/" rel="self" type="application/rss+xml" />
	<link>https://www.diyautoworksng.com</link>
	<description>DIY car repair procedures and maintenance advice</description>
	<lastBuildDate>Fri, 01 Feb 2019 09:05:55 +0000</lastBuildDate>
	<language>en-GB</language>
	<sy:updatePeriod>
	hourly	</sy:updatePeriod>
	<sy:updateFrequency>
	1	</sy:updateFrequency>
	
	<item>
		<title>Replacement of the Rear Door Actuator on 2003 &#8211; 2007 Accord</title>
		<link>https://www.diyautoworksng.com/replacement-of-the-rear-door-actuator-on-2003-2007-accord/</link>
					<comments>https://www.diyautoworksng.com/replacement-of-the-rear-door-actuator-on-2003-2007-accord/#respond</comments>
		
		<dc:creator><![CDATA[Piyke]]></dc:creator>
		<pubDate>Sat, 16 Jun 2018 09:58:19 +0000</pubDate>
				<category><![CDATA[DIY Procedures]]></category>
		<category><![CDATA[2003 Accord]]></category>
		<category><![CDATA[Actuator]]></category>
		<guid isPermaLink="false">http://www.diyautoworksng.com/?p=2733</guid>

					<description><![CDATA[Actuators are responsible for lifting the door knob once the key fob is pressed or the car is unlocked with the key. I replace that for the rear passenger side door. A weak one will lead to inconsistent or partial lifting of the door lock knob. Once this starts happening, it&#8217;s best to have it replaced. It&#8217;s really not a]]></description>
		
					<wfw:commentRss>https://www.diyautoworksng.com/replacement-of-the-rear-door-actuator-on-2003-2007-accord/feed/</wfw:commentRss>
			<slash:comments>0</slash:comments>
		
		
			</item>
		<item>
		<title>What you should Know if Considering a Denso Direct-fit Radiator</title>
		<link>https://www.diyautoworksng.com/what-you-should-know-if-considering-a-denso-direct-fit-radiator/</link>
					<comments>https://www.diyautoworksng.com/what-you-should-know-if-considering-a-denso-direct-fit-radiator/#comments</comments>
		
		<dc:creator><![CDATA[Piyke]]></dc:creator>
		<pubDate>Sun, 13 May 2018 18:08:30 +0000</pubDate>
				<category><![CDATA[DIY Advice]]></category>
		<category><![CDATA[2003 Accord]]></category>
		<category><![CDATA[Denso]]></category>
		<category><![CDATA[Direct-fit]]></category>
		<category><![CDATA[Radiator]]></category>
		<guid isPermaLink="false">http://www.diyautoworksng.com/?p=2725</guid>

					<description><![CDATA[In this video I cover a little issue to be aware of if you plan to install a Denso direct-fit radiator on the 2003 Accord. I omitted this issue on my earlier post; replacement of the radiator on 2003 Accord. This may apply to other Denso Direct-fit radiators. The problem is with the left border of the radiator which isn&#8217;t flush]]></description>
		
					<wfw:commentRss>https://www.diyautoworksng.com/what-you-should-know-if-considering-a-denso-direct-fit-radiator/feed/</wfw:commentRss>
			<slash:comments>2</slash:comments>
		
		
			</item>
		<item>
		<title>Rotor (Brake Disc) Replacement or Resurface? Here&#8217;s How to Decide</title>
		<link>https://www.diyautoworksng.com/rotor-brake-disc-replacement-or-resurface-heres-how-to-decide/</link>
					<comments>https://www.diyautoworksng.com/rotor-brake-disc-replacement-or-resurface-heres-how-to-decide/#respond</comments>
		
		<dc:creator><![CDATA[Piyke]]></dc:creator>
		<pubDate>Sun, 13 May 2018 17:49:15 +0000</pubDate>
				<category><![CDATA[DIY Procedures]]></category>
		<category><![CDATA[2003 Accord]]></category>
		<category><![CDATA[brake disc]]></category>
		<category><![CDATA[Minimum thickness]]></category>
		<category><![CDATA[rotor]]></category>
		<category><![CDATA[Service limit]]></category>
		<guid isPermaLink="false">http://www.diyautoworksng.com/?p=2721</guid>

					<description><![CDATA[In this video, I describe how to decide whether to resurface your rotor aka brake disc one more time or get a new one.  It&#8217;s all about service limits. While this procedure is done on a 2003 Honda Accord, it is the same across makes and models. If you end up with the choice to replace your rotor you may]]></description>
		
					<wfw:commentRss>https://www.diyautoworksng.com/rotor-brake-disc-replacement-or-resurface-heres-how-to-decide/feed/</wfw:commentRss>
			<slash:comments>0</slash:comments>
		
		
			</item>
		<item>
		<title>Cigarette Lighter Troubleshoot &#038; Fix on Honda Accord</title>
		<link>https://www.diyautoworksng.com/cigarette_lighter_troubleshoot_fix_-honda_accord/</link>
					<comments>https://www.diyautoworksng.com/cigarette_lighter_troubleshoot_fix_-honda_accord/#respond</comments>
		
		<dc:creator><![CDATA[Piyke]]></dc:creator>
		<pubDate>Thu, 03 May 2018 14:30:02 +0000</pubDate>
				<category><![CDATA[DIY Procedures]]></category>
		<category><![CDATA[2003 Accord]]></category>
		<category><![CDATA[Cigarette lighter socket]]></category>
		<category><![CDATA[Fuse]]></category>
		<category><![CDATA[Power outlet]]></category>
		<guid isPermaLink="false">http://www.diyautoworksng.com/?p=2714</guid>

					<description><![CDATA[In this video, I troubleshoot a broken cigarette lighter socket on the 2003 Accord and replace the culprit; a broken fuse. Procedure applies to most Honda&#8217;s and many the car makes. The fuse for the cigarette lighter on the 2003 &#8211; 2007 accord is the number 9 fuse in the under dash fusebox.]]></description>
		
					<wfw:commentRss>https://www.diyautoworksng.com/cigarette_lighter_troubleshoot_fix_-honda_accord/feed/</wfw:commentRss>
			<slash:comments>0</slash:comments>
		
		
			</item>
		<item>
		<title>How to Check Suspension Ball Joints on Cars</title>
		<link>https://www.diyautoworksng.com/check-suspension-ball-joints/</link>
					<comments>https://www.diyautoworksng.com/check-suspension-ball-joints/#respond</comments>
		
		<dc:creator><![CDATA[Piyke]]></dc:creator>
		<pubDate>Sun, 25 Feb 2018 19:48:25 +0000</pubDate>
				<category><![CDATA[DIY Procedures]]></category>
		<category><![CDATA[2003 Accord]]></category>
		<category><![CDATA[ball joint]]></category>
		<category><![CDATA[check ball joint]]></category>
		<category><![CDATA[honda k-leg]]></category>
		<category><![CDATA[wheel pull out]]></category>
		<guid isPermaLink="false">http://www.diyautoworksng.com/?p=2680</guid>

					<description><![CDATA[Ball joints are critical components of any suspension system. This video shows how to test the ball joints in a car&#8217;s suspension system to determine if they are failing. Although the procedure is done on on a Honda Accord, the procedure is pretty much the same across vehicle makes and models. This test is typically recommended when abnormal sounds are]]></description>
		
					<wfw:commentRss>https://www.diyautoworksng.com/check-suspension-ball-joints/feed/</wfw:commentRss>
			<slash:comments>0</slash:comments>
		
		
			</item>
		<item>
		<title>Fix High Beam Headlights that won&#8217;t go Off on 2003 &#8211; 2007 Accord 4cyl</title>
		<link>https://www.diyautoworksng.com/fix-high-beam-headlights-wont-go-off-2003-2007-accord-4cyl/</link>
					<comments>https://www.diyautoworksng.com/fix-high-beam-headlights-wont-go-off-2003-2007-accord-4cyl/#comments</comments>
		
		<dc:creator><![CDATA[Piyke]]></dc:creator>
		<pubDate>Sat, 03 Feb 2018 20:38:35 +0000</pubDate>
				<category><![CDATA[DIY Procedures]]></category>
		<category><![CDATA[2003 Accord]]></category>
		<category><![CDATA[ELD replacement]]></category>
		<category><![CDATA[Engine fusebox]]></category>
		<category><![CDATA[Fusebox disassembly]]></category>
		<category><![CDATA[P1298]]></category>
		<guid isPermaLink="false">http://www.diyautoworksng.com/?p=2666</guid>

					<description><![CDATA[This post details the fix for high beam headlights that do not go off after turning off the car. I replace the circuit board in the engine fusebox as against replacing the entire fusebox and spending loads of cash. The video also shows how to replace the electronic load detector (ELD)]]></description>
		
					<wfw:commentRss>https://www.diyautoworksng.com/fix-high-beam-headlights-wont-go-off-2003-2007-accord-4cyl/feed/</wfw:commentRss>
			<slash:comments>2</slash:comments>
		
		
			</item>
		<item>
		<title>VTC Solenoid Oil Leak Fix on 2003 &#8211; 2007 Accord</title>
		<link>https://www.diyautoworksng.com/vtc-solenoid-oil-leak-fix-2003-accord/</link>
					<comments>https://www.diyautoworksng.com/vtc-solenoid-oil-leak-fix-2003-accord/#respond</comments>
		
		<dc:creator><![CDATA[Piyke]]></dc:creator>
		<pubDate>Sun, 28 Jan 2018 14:10:05 +0000</pubDate>
				<category><![CDATA[DIY Procedures]]></category>
		<category><![CDATA[2003 Accord]]></category>
		<category><![CDATA[leak]]></category>
		<category><![CDATA[o-ring]]></category>
		<category><![CDATA[VTC solenoid]]></category>
		<guid isPermaLink="false">http://www.diyautoworksng.com/?p=2662</guid>

					<description><![CDATA[A worn VTC solenoid o-ring will cause an oil leak that will trickle down the  right side of the engine. The leak can make the bottom of the oil pan wet. This video provides how to replace the o-ring and also how to replace the solenoid on the 2003 &#8211; 2007 Honda Accord 4 cyl.]]></description>
		
					<wfw:commentRss>https://www.diyautoworksng.com/vtc-solenoid-oil-leak-fix-2003-accord/feed/</wfw:commentRss>
			<slash:comments>0</slash:comments>
		
		
			</item>
		<item>
		<title>Replacement of Front Shock Absorbers (Struts) on the 2003 &#8211; 2007 Accord</title>
		<link>https://www.diyautoworksng.com/replacement-front-shock-absorbers-struts-2003-2007-accord/</link>
					<comments>https://www.diyautoworksng.com/replacement-front-shock-absorbers-struts-2003-2007-accord/#comments</comments>
		
		<dc:creator><![CDATA[Piyke]]></dc:creator>
		<pubDate>Sat, 21 Jan 2017 16:10:50 +0000</pubDate>
				<category><![CDATA[DIY Procedures]]></category>
		<category><![CDATA[2003 Accord]]></category>
		<category><![CDATA[Shock absorber]]></category>
		<category><![CDATA[Struts]]></category>
		<guid isPermaLink="false">http://www.diyautoworksng.com/?p=2573</guid>

					<description><![CDATA[I needed to inspect my front shock absorbers and decided to do this video. Hope you find it useful.]]></description>
		
					<wfw:commentRss>https://www.diyautoworksng.com/replacement-front-shock-absorbers-struts-2003-2007-accord/feed/</wfw:commentRss>
			<slash:comments>3</slash:comments>
		
		
			</item>
		<item>
		<title>Power Steering Pump Rebuild on 2003 &#8211; 2007 Accord</title>
		<link>https://www.diyautoworksng.com/power-steering-pump-rebuild-2003-accord/</link>
					<comments>https://www.diyautoworksng.com/power-steering-pump-rebuild-2003-accord/#comments</comments>
		
		<dc:creator><![CDATA[Piyke]]></dc:creator>
		<pubDate>Wed, 14 Sep 2016 19:06:15 +0000</pubDate>
				<category><![CDATA[DIY Procedures]]></category>
		<category><![CDATA[2003 Accord]]></category>
		<category><![CDATA[7th generation Accord]]></category>
		<category><![CDATA[power steering pump]]></category>
		<category><![CDATA[power steering pump overhaul]]></category>
		<category><![CDATA[power steering pump repair]]></category>
		<category><![CDATA[PS pump]]></category>
		<category><![CDATA[PS pump overhaul]]></category>
		<category><![CDATA[PS pump rebuild]]></category>
		<category><![CDATA[PS pump repair]]></category>
		<guid isPermaLink="false">http://www.diyautoworksng.com/?p=2489</guid>

					<description><![CDATA[This is the complete and lucid post on the rebuild of the power steering pump on the 7th generation 4cyl Accord. I did this the hard way with no ton press or the like. A few leaks here and there and a worn (noisy) power steering pump bearing indicated the need for the rebuild. Leaks are gone, engine sounds quieter]]></description>
		
					<wfw:commentRss>https://www.diyautoworksng.com/power-steering-pump-rebuild-2003-accord/feed/</wfw:commentRss>
			<slash:comments>4</slash:comments>
		
		
			</item>
		<item>
		<title>Replacing VTEC Spool Valve Assembly Filter on the 2003 Accord</title>
		<link>https://www.diyautoworksng.com/replacing-vtec-spool-valve-assembly-filter-on-the-2003-accord/</link>
					<comments>https://www.diyautoworksng.com/replacing-vtec-spool-valve-assembly-filter-on-the-2003-accord/#comments</comments>
		
		<dc:creator><![CDATA[Piyke]]></dc:creator>
		<pubDate>Tue, 25 Aug 2015 23:52:46 +0000</pubDate>
				<category><![CDATA[DIY Procedures]]></category>
		<category><![CDATA[15815-RAA-A02]]></category>
		<category><![CDATA[2003 Accord]]></category>
		<category><![CDATA[filter spool valve assembly]]></category>
		<category><![CDATA[iVTEC]]></category>
		<category><![CDATA[oil leak]]></category>
		<category><![CDATA[spool valve assembly]]></category>
		<category><![CDATA[Valve]]></category>
		<category><![CDATA[VTEC]]></category>
		<category><![CDATA[VTEC spool valve assembly filter]]></category>
		<guid isPermaLink="false">http://www.diyautoworksng.com/?p=329</guid>

					<description><![CDATA[The featured image says it all. My VTEC spool valve assembly was leaking oil and I figured to change this. This procedure explains how to change the spool valve assembly filter (PN:15810-RAA-A02). This will also double for the replacement of the VTEC spool valve assembly. The oil was leaking onto my oil filter giving the impression that there was a]]></description>
		
					<wfw:commentRss>https://www.diyautoworksng.com/replacing-vtec-spool-valve-assembly-filter-on-the-2003-accord/feed/</wfw:commentRss>
			<slash:comments>7</slash:comments>
		
		
			</item>
	</channel>
</rss>
